High - Speed Closed Vibrating Nc Servo Roll Feeder Coil Weight 10000kg

www.ruihui.net
Punch can be used with different feeders, mainly relying on the feeder speed, saving labor, safety and efficiency. Most of the punches are now automatically fed. According to the schedule and speed, they can be divided into air feeder and roller feeder, NC servo feeding. Machine and so on.

(1) Accuracy of feeding: The accuracy of the roller feeder is greater than that of the air feeder and the servo feeder;

(2) Speed: The air feeder is three hundred times, and the high-speed roller feeder is about five hundred times. The above data will be related to the length of the material and the length of the distance. The shorter the speed, the faster the speed.

Punch automatic feeder installation steps
(1) On the other side of the punching platen, drill four holes according to the set position and size, and then fix the mounting plate on it.

(2) Lift the main part with a sling, then align the shackle between the sliding plate and the mounting plate, use two matching screws on the main body, and fix it to the mounting plate at the same time.

(3) When the horizontal position of the feeding height is inconsistent with the die pressure, the automatic feeding machine slide of the press will have an adjustment of about one hundred millimeters for adjustment. At this point, you can loosen the two bolts on the slide, adjust the bolts fixed on the plate, change the horizontal position of the feeder, and adjust the position, then fasten the screws.

(4) Fix the mold to ensure that the mold is perpendicular to the direction of the roller and that it is placed on the punch slide to be installed in a relaxed position.

(5) Dark yellow electric control box and proximity switch in the appropriate part of the punching machine, and whether the detector can work normally.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi